TSC MB341T - Page 63

59
6.5.2 Ethernet
The table below describes the configurable items for the printer’s Ethernet interface.
Item
Description
Default
Network Interface
Sets the network interface. Setting options: Ethernet / Wi-Fi.
Note:
If you have used Wi-Fi interface before, you have to switch to Ethernet here first.
N/A
Status
Displays information about the Ethernet connection if the printer is connected to a wired network.
N/A
Configure
Select to use a DHCP server or non-DHCP server.
 DHCP: Select to use a DHCP (Dynamic Host Configuration Protocol) network protocol.
 Static IP: Select to use a non-DHCP server. You need to manually enter the IP address, subnet mask, and
default gateway.
N/A
6.5.3 Wi-Fi
The table below describes the configurable items for the printer’s Wi-Fi connection.
Item
Description
Default
Network
Interface
Sets the network interface. Setting options: Ethernet / Wi-Fi.
Note:
If you are connected to Wi-Fi network before, you have to switch to Wi-Fi here first.
N/A
Status
Displays information about the Wi-Fi connection if the printer is connected to a wireless network.
N/A
Config.
Select to use a DHCP server or non-DHCP server.
 DHCP: Select to use a DHCP (Dynamic Host Configuration Protocol) network protocol.
 Static IP: Select to use a non-DHCP server. You need to manually enter the IP address, subnet mask, and default
gateway.
DHCP
SSID
Sets SSID for the Wi-Fi connection.
N/A