Note:
1. The width and thickness quoted above are said of the label plus its backing paper.
2. Likewise, the approval of label entails that of its backing paper.
3. In the peel off mode, the minimum pitch is 35mm.
4. In the cutter mode, it is required the paper be wound outside. Otherwise, paper jam tends to result.
5. In the cutter mode, the media thickness is 0.06 ~ 0.2 mm, the media weight is 100 g/m2 at maximum, and the media types are
receipt, tag, and label liner w/o glue.
Except for the linerless cutter, all TSC regular/heavy duty/care label cutters DO NOT cut on media with glue.
6. Paper shape is as shown on next page.
7. Tag is 0.2mm in thickness, and is less than 100g/m2 in weight.
To Next Page
Loading...
