How to fix poor print quality on TSC TTP-243 Pro Barcode Reader?
If you're experiencing poor print quality with your TSC Barcode Reader, try these steps: First, clean the thermal print head. Next, adjust the print density setting. Also, verify that the ribbon and media are compatible and that the media thickness is within the specified range. Finally, ensure that the correct power supply is connected to the printer.
What to do if the ON-LINE indicator is off and the ERR. indicator is on for TSC TTP-243 Pro?
If the ON-LINE indicator is off and the ERR indicator is on for your TSC Barcode Reader, it could be due to a few reasons. If there's one beep, it may be a gap sensor problem. In this case, calibrate the gap sensor or set up the paper length correctly in your labeling software. Also, ensure the paper is installed correctly. If there are two beeps, check if an outside wound ribbon is being used, ensure the ribbon is threaded correctly, and verify a paper core is installed on the ribbon take-up spindle. Additionally, calibrate the sensitivity of the gap sensor.
What to do if my TSC TTP-243 Pro is continuously feeding when printing labels?
If your TSC Barcode Reader is continuously feeding when printing labels, verify that the sensor type is set correctly in the driver or command script settings. If you're using die-cut media, try calibrating the gap sensor again.
What to do if the power indicator on my TSC TTP-243 Pro Barcode Reader doesn't illuminate?
If the power indicator on your TSC Barcode Reader doesn't light up, check if the power cord is properly connected. Also, inspect the LED on the power supply; if it's not lit, the power supply may be damaged. Finally, verify that the correct power supply is connected to the printer.
Why does the ribbon not advance or rewind on my TSC Barcode Reader?
If the ribbon in your TSC Barcode Reader isn't advancing or rewinding, ensure the media and ribbon are installed and the print head mechanism is engaged before turning on the printer. Also, make sure the black ribbon spindle is installed in the correct direction. Finally, check the "Media settings method" in the driver to see if it is set to direct thermal mode.
General| Brand | TSC |
|---|---|
| Model | TTP-243 Pro Series |
| Category | Barcode Reader |
| Language | English |
Lists regulatory compliances such as CE Class A, FCC Class A, C-Tick Class A, TÜV/Safety, and CCC.
Details the printable area dimensions for 203 DPI and 300 DPI resolutions, including width and length.
Lists supported 1D and 2D barcode symbologies and add-ons for the printer.
Explains the function and placement of the Feed Gap Sensor and Black Mark Sensor.
Details specifications for paper media, including width, length, thickness, and roll diameter.
Describes the two media types (label and ticket) and sensor types for paper.
Details paper width, length, thickness, weight, roll diameter, and core ID.
Details ribbon shape, width, winding width, leading/end tape, max OD, and winding method.
Instructions for inspecting the printer and packaging upon arrival and retaining materials.
Lists all items included in the printer package for user verification.
Identifies and labels key external components of the printer in a top front view.
Describes the external label roll mount, an optional accessory for the printer.
Explains the function of the PWR, ON-LINE, and ERR indicators, and the PAUSE and FEED buttons.
Provides step-by-step instructions for physically connecting and positioning the printer.
Details the process of loading label and tag media into the printer.
Instructions on how to set up and use the peel-off function for labels.
Step-by-step guide for loading thermal transfer ribbon into the printer.
Instructions for installing the external label roll mount accessory.
Guide for installing optional memory modules (SD cards) into the printer.
Instructions on how to initiate and interpret the printer's self-test mode.
Explains the dump mode and its use for verification of programming commands or debugging.
Introduces the utilities available upon printer startup for setup and testing.
Details the steps and functions of the printer's self-test utility.
Explains how to calibrate the gap sensor for accurate media detection.
Describes the process of resetting printer parameters to default factory settings.
Lists common printer problems and their corresponding solutions.
To Next Page
