How to troubleshoot if the power indicator does not illuminate on my TSC Printer?
If the power indicator on your TSC Printer does not illuminate: * Plug the power cord into both the printer and the outlet. * Switch the printer on.
How to improve poor print quality on my TSC Printer?
If you observe poor print quality on your TSC printer, the following steps may help: * Reload the ribbon and media, ensuring they are correctly installed. * Clean the print head and platen roller to remove any dust or adhesive. * Adjust the print density and print speed settings. * Run a printer self-test to check for missing dots in the print head test pattern. * Ensure you are using compatible ribbon and label media. * Adjust the printhead pressure adjustment knob. * Ensure the release lever properly latches the printhead.
What to do if my TSC Printer says 'No Paper'?
If your TSC Printer indicates 'No Paper', here's what to check: * Ensure that you have a new label roll. * Refer to the user’s manual for instructions on how to correctly reinstall the label roll. * Calibrate the gap/black mark sensor.
Why is my TSC Printer not printing anything on the label?
If your TSC Printer is not printing on the label, consider these potential causes: * Ensure the label or ribbon is loaded correctly, following the loading instructions. * Verify that the ribbon and media are compatible. * Check the ribbon-inked side is correctly oriented. * Adjust the print density setting.
What to do if my TSC Printer says 'No Ribbon'?
If your TSC Printer indicates 'No Ribbon': * Supply a new ribbon roll. * Refer to the user’s manual for steps to reinstall the ribbon correctly.
Why is there a gray line on the labels from my TSC Printer?
If you notice a gray line on the blank labels printed by your TSC Printer: * Clean the print head. * Clean the platen roller.
Why is the RTC time incorrect after rebooting my TSC Printer?
If the RTC time is incorrect when you reboot your TSC Printer: * Check if there is a battery on the main board.
What to do if I can't download files to my TSC Printer's memory?
If you are unable to download a file to the memory (FLASH / DRAM/CARD) of your TSC Printer: * Delete unused files in the memory.
How to fix unstable label feeding (skew) on my TSC Printer?
If the label feeding is unstable (skewed) when printing with your TSC Printer: * If the label is moving to the right side, move the label guide to the left. * If the label is moving to the left side, move the label guide to the right.
How to fix a paper jam in my TSC Printer?
If your TSC Printer is experiencing paper jams: * Calibrate the media sensor. * Ensure the media size is set correctly. * Remove any stuck labels from inside the printer mechanism.
General| Resolution | 203 dpi |
|---|---|
| Model | TTP-2410MU |
| Type | Barcode Printer |
| Print Width | 4.09" (104 mm) |
| Media Width | 25.4 mm - 118 mm |
| Media Thickness | 0.06 - 0.25 mm |
| Media Core Diameter | 76.2 mm (3 inch) |
| Ribbon Core Diameter | 1" (25.4 mm) |
| Interface | USB 2.0, Serial RS-232, Parallel, Ethernet |
| Power | 100-240 VAC, 50/60 Hz |
| Operating Temperature | 5°C - 40°C |
| Storage Temperature | -40 ~ 60°C (-40 ~ 140°F) |
| Humidity | 25 ~ 85% non-condensing |
| Certifications | CE, FCC, RoHS |
| Supported Barcode Types | Code 39, Code 128, UPC-A, UPC-E, EAN-8, EAN-13, ITF, Codabar, QR Code, Data Matrix, PDF417 |
To Next Page
