TSC TTP-2410MU Series - Setup; Printer Setup (TSPL2; ZPL2)

- 55 -
6.3 Setup
This “Setup” category can set up the printer settings for TSPL2, ZPL2, sensor, serial
interface, and Ethernet interface.
6.3.1 Printer Setup (TSPL2/ ZPL2)
TSPL2
This “TSPL” category can set up the printer settings for TSPL2.
Item
Description
Default
Speed
Use this item to setup print speed. The each increase or decrease
is 1 ips. Available setting is from 4 to 12.
6
Density
Use this option to setup printing darkness. The available setting is
from 0 to 15, and the step is 1. You may need to adjust your
density based on selected media.
8
Main
Menu
Setup
Printer
Setup
TSPL2
Speed
Density
Direction
Print mode
None
Batch Mode
Peeler Mode
Cutter Mode
Cutter Batch
Offset
Shift X
Shift Y
Reference X
Reference Y
Code Page
Country