Need help?Do you have a question about the TSC TTP-243 Series and is the answer not in the manual?
General| Print Method | Thermal Transfer / Direct Thermal |
|---|---|
| Resolution | 203 DPI |
| Operating Temperature | 5°C to 40°C (41°F to 104°F) |
| Memory | 8 MB Flash, 4 MB SDRAM |
| Interface | RS-232, USB |
| Label Thickness | 0.06 mm to 0.19 mm |
| Power Supply | AC 100-240V, 50-60Hz |
| Humidity | non-condensing |
Lists regulatory compliance standards for the printer.
Procedures for checking the printer and packaging for damage upon receipt.
Lists all included printer components and optional items.
Identifies key external components of the bar code printer.
Details the accessory for mounting external label rolls.
Explains the function of the printer's buttons and status LEDs.
Steps for connecting the printer to a computer and power source.
Instructions for correctly loading label and tag media into the printer.
Guide on how to set up the printer for the self-peeling label feature.
Step-by-step guide for installing the thermal transfer ribbon.
Instructions for attaching the external label roll mount accessory.
Steps for installing an optional memory module into the printer.
How to initiate and perform the printer's self-test diagnostic.
Overview of utilities activated during printer startup.
Performs printer diagnostics and prints internal settings.
Calibrates the printer's gap sensor for media detection.
Resets printer parameters and clears downloaded files to default values.
Lists common problems and their solutions for the bar code printer.
To Next Page
