Need help?Do you have a question about the TSC Printronix MH261T Series and is the answer not in the manual?
General| Manufacturer | TSC Printronix |
|---|---|
| Resolution | 203 dpi |
| Ribbon Core Size | 1 inch (25.4 mm) |
| Operating Temperature | 41°F to 104°F (5°C to 40°C) |
| Series | MH261T |
| Print Method | Thermal Transfer/Direct Thermal |
| Processor | 32-bit RISC |
| Interface | USB 2.0, Serial RS-232, Ethernet 10/100 |
| Power | 100-240V AC, 50/60Hz |
| Ribbon Type | Wax, Resin |
| Storage Temperature | -4°F to 122°F (-20°C to 50°C) |
| Operating Humidity | 20% to 85% RH (non-condensing) |
| Power Requirements | 100-240V AC, 50/60Hz |
| Certifications | CE, FCC, UL, cUL |
Detailed technical specifications for MH261T and MH361T series printers, covering resolution, speed, dimensions, and more.
Procedures for unpacking and inspecting the printer and its accessories upon arrival.
Overview of the printer's physical components, including front, interior, and rear views.
Explains the printer's control interface, including the LCD, buttons, and indicators.
Details the meaning of LED colors and the functions of the printer's keypads.
Displays and explains icons shown on the printer's LCD and LED indicators.
Explains how to interact with the printer's touch screen interface for navigation and operation.
Provides step-by-step instructions for initial printer setup and connection to a computer.
Guides users on how to correctly install and load the printer ribbon.
Provides instructions for loading various types of media, such as rolls and fanfold.
Details the process for loading fanfold or external media sources into the printer.
Explains how to load media when using the optional peel-off feature.
Describes how to adjust specific knobs to prevent ribbon wrinkles during printing.
Guides users on how to launch and begin using the TSC Console application.
Explains how to configure the printer's Ethernet connection and IP settings.
Details how to connect the printer via Wi-Fi and integrate it with the TSC Console.
Provides steps to reset the printer's Wi-Fi module to its factory default settings.
Outlines various functions available within the printer's configuration menu.
Explains how to configure actions that occur after printing, such as cutting or peeling.
Describes how to access the printer's main menu using either the touch screen or physical keys.
Provides a summary of the six main categories available within the printer's LCD menu.
Section for configuring various printer settings.
Details the printer settings configurable under the TSPL command set.
Details the printer settings configurable under the ZPL2 command set.
Details the configuration options for the printer's RS-232 serial communication interface.
Explains how to configure the printer's Ethernet connection and network settings.
Details the configuration options for the printer's Wi-Fi network connection.
Details the configuration options for the printer's Bluetooth wireless connection.
To Next Page