TSC Printronix MH261T Series - Sensor

38
6.4 Sensor
Sensor is used to calibrate the selected sensor.
Item
Description
Default
Auto Calibration
Set the media sensor type and calibrate the selected sensor automatically.
N/A
Manual Calibration
In case Auto Calibration does not work, please use “Manual” function to set the paper length
and gap/bline size to complete the calibration setting.
N/A
Threshold Detect
Set sensor sensitivity in fixed or auto.
Auto
Maximum Length
Set the maximum length for label calibration.
762
mm
Advanced
Set the minimum paper length and maximum gap/bline length for auto-calibratIon.
0 mm
Menu Sensor
Auto Calibration
Gap
Black Mark
Continuous
Preprint
Manual Calibration Standard
Gap
Black Mark
Continuous
Threshold Detect
Auto
Fixed
Maximum Length
Advanced
Min. Paper
Max. Gap/Mark