TScale BW Series - Serial Communication and Display Settings

BW / CW/VW/BWS Series Indicator Technical Manual
- 17 -
Pr
To set the parity
Options:
7 e1 / 7 o1 / 8 n1
Ptype
To set printer model
Options:
Tpu p : set the Tscale printer tpup
Lp50 : Set the Tscale printer LP-50
P 2 cal
Deci
To set to use decimal
Options;
0 / 0.0 / 0.00 / 0.000
Dual
off
R1 inc
To select the scale division.
Options:
1 / 2 / 5 / 10 / 20 / 50 / 100 /
200
R1 cap
To set the scale capacity
On
R1 inc
To select the scale division.
Options:
1 / 2 / 5 / 10 / 20 / 50 / 100 /
200
R1 cap
To set the scale capacity.
Then press to set R2inc and R2
cap
Cal
To set non linear calibration
Count
Showing scale internal counts
gra
To set local gravity
P4 oth
Lock
To set keypad lock
Options: on / off
anm
To set animal mode.
Options: on / off
Note: Du al – This function is used to dual interval.
On: Dual interval enables / Off: Dual interval disable.
Then can set Capacity and Division