Operation 3-5
1D barcode scanners that support USB 1.0 or 1.1 devices can be used
(Zebra LS2208 works well) to select an existing Zone and Location pair in
the list boxes on the Main page, if the barcodes use the format
ZoneName:LocationName (i.e., the zone name followed by a colon
followed by the location name). The barcode can then be scanned and
the specified zone and location will be automatically selected in the list
boxes.
There are free online barcode generators available (i.e.,
http://barcode.tec-it.com/en). Select linear Code 128 to generate the
barcodes.
To Next Page
Loading...
