Technical Section
SELECT Key
The SELECT key has three functions.
1. The SELECT key is used to gain access to specific menus. To access a
menu, scroll through the menus (using arrow keys) and place the
flashing cursor on the desired menu. Press the SELECT key to select
the menu. The first line on the display will now be the selected menu,
and the second line will show the first menu item.
2. The SELECT key is used to gain access to specific menu items. To
access a menu item scroll through the menu items until item appears.
Press the SELECT key and the menu item will now appear on the first
line of the display, and the second line will show the item value.
3. Pressing the SELECT key when finished changing an item will save the
data, and exit back to the menu items. An audible tone (3 beeps) and
visual display (“saving data”) gives confirmation data is being saved.
/ Keys
The / keys are used to scroll through the menus, menu items, and through
the range of item values that can be selected. Depending on the item type the
values may be numerical, specific properties (on / off), or a bar graph.
NOTE: When programming a menu item, continuously pressing the arrow key
will scroll through the values faster than if arrow key is pressed and
released.
Keystroke Procedure
The keystroke operation is consistent for all menus. The sequence of keystrokes to
follow is the same regardless of the menu item being changed.
1. Press the MENU key to access the main menu.
2. Use the / keys to scroll through the menu choices. The blinking cursor needs
to be on the first letter of the menu you want to access.
3. Press the SELECT key to access chosen menu.
4. The menu selected is now displayed on line one, and the first menu item is
displayed on line 2. Use the / keys to scroll through the menu items. Scroll
through the menu items until desired item is displayed.
5. Press the SELECT key to access chosen item. The top line of display shows
menu item selected, while the second line shows current item value.
6. Use the / keys to change item value.
7. Save the new value by pressing the SELECT key (pressing the MENU key will
exit out of menu function without saving data).
8. Press the MENU key to exit current menu, and return to main menu.
9. Press the MENU key again to return to normal instrument operation.
To Next Page
Loading...
