Operation 7
• Auto-save and Cont-Key modes use Log Interval under the
Log Settings:
Mode
Log Settings
Auto-save Log Interval
Cont-key Log Interval
• Use Cont-key mode with Log Interval set to 1 second to take a
Sweep measurement across an area.
Delete Data
Use this to delete all data, delete test or delete sample.
% Memory
This option displays the memory available. Delete All, under Delete
Data, will clear memory and reset the memory available.
LogDat2
™ Downloading Software
The Model 5725 comes with special software called LogDat2 Downloading
Software, which is designed to provide you with maximum flexibility and
power. To install this software on your computer, follow the instructions on
the label of the LogDat2 CD-ROM.
To download data from the Model 5725, connect the supplied computer
interface USB cable to the Model 5725 and to a computer USB port. Then
run the LogDat2 software. Within the LogDat2 software, either select the
tests to be downloaded or double-click on a test to open it.
To Next Page
Loading...
Need help?
General
