What to do if my TSI Instruments VelociCalc 9600 show a memory full message?
If your TSI Instruments Measuring Instruments show a memory full message and cannot log more data, it means the memory is full. If you want to keep the data, download it first, and then DELETE ALL memory.
Why is there no display on my TSI Instruments VelociCalc 9600 Measuring Instruments?
If your TSI Instruments Measuring Instruments are not displaying anything, it could be due to several reasons: * The unit might not be turned on, so switch it on. * The batteries may be low or dead, so replace them or plug in the AC/DC power supply. * The battery contacts might be dirty, so clean them.
How to fix unstable velocity readings on TSI Instruments VelociCalc 9600 Measuring Instruments?
If the velocity reading on your TSI Instruments Measuring Instruments fluctuates unstably, it may be due to fluctuating flow. Try repositioning the probe in less turbulent flow or use a longer time constant.
General| Relative Humidity Accuracy | ±3% RH |
|---|---|
| Air Velocity Accuracy | ±3% of reading or ±3 ft/min (±0.015 m/s), whichever is greater |
| Temperature Accuracy | ±0.5 °F (±0.3 °C) |
| Relative Humidity Range | 5 to 95% RH |
| Display | LCD |
| Data Logging | Yes |
| Power Supply | AC adapter |
| Battery Life | Approximately 8 hours |
| Storage Temperature | -4 to 140 °F (-20 to 60 °C) |
Lists all standard equipment included with the meter.
Details various optional probes for different measurements.
Lists optional accessories and parts for the meter.
Explains how to power the meter using batteries or AC/DC adapter.
Guides on connecting ventilation and IAQ probes to the meter.
Instructions for connecting the static pressure probe.
Details on connecting an optional pitot probe for velocity measurements.
How to connect K-alloy thermocouples for temperature measurement.
Steps to connect a Bluetooth printer to the Model 9650.
Instructions for connecting the meter to a PC via USB for data download.
Identifies and explains the function of each button on the keypad.
Explains measurement, dashboard, and soft key icons used on the device.
Describes how to select the device language upon first power-on.
Overview of the main screen for viewing live readings and logging data.
How to configure soft keys for quick access to meter functions.
Configures which measurements appear on the Dashboard and their order.
Lists measurement parameters adjustable in the field.
Configures settings for velocity and flow measurements, including temperature.
Options for language, number format, time constant, and sound.
Allows configuration of measurement units for each parameter.
Sets the device's date and time, and preferred formats.
Adjusts screen brightness and enables/disables automatic shutdown.
Displays model, serial number, calibration, and probe details.
Configures the meter to log data when the Enter button is pressed.
Sets up the meter for continuous data logging.
Instructions for changing TESTID labels directly on the meter.
How to update TESTID labels using an Excel spreadsheet.
How to select and view logged data files (TESTIDs).
Navigates through logged samples within a TESTID.
Procedure for deleting logged data files from the meter.
Guides on accessing and viewing logged CSV files on a computer.
Steps for calculating Percent Outside Air using temperature or CO2.
How to measure heat flow by taking upstream and downstream readings.
Instructions for performing duct traverses for airflow measurements.
Guidelines for cleaning and disinfecting the VelociCalc meter.
Routine checks to ensure the meter and its components are in good condition.
Lists common symptoms, causes, and corrective actions for meter issues.
Contact information and procedures for obtaining technical support.
Technical specifications for the 960 probe.
Technical specifications for the 964 probe.
Technical specifications for the 980 IAQ probe.
Technical specifications for 792 and 794 thermocouple probes.
Technical specifications for pitot tubes.
Technical specifications for static/differential pressure measurements.
Specifies operating and storage temperature ranges for the instrument.
Details the power sources and specifications for the meter.
To Next Page