TSI Instruments VelociCalc 9600 Series User Manual

Operation and Service Manual 27
NOTICE
Time Constant is the display averaging period. The display will
update every second; however, the displayed reading will be the
average over the time constant period. For example, if the time
constant is 5 seconds, the display will update every second, but
the displayed reading will be the average of the last 5 seconds.
Unit Settings
The Unit Settings page is used to
configure the desired unit of
measure for each measurement.
Date and Time
The Date and Time page is used to
configure the desired formats for
date and time and to set device
date and time.

TSI Instruments VelociCalc 9600 Series Specifications

General

Brand	TSI Instruments
Model	VelociCalc 9600 Series
Category	Measuring Instruments
Language	English