TSI Instruments VelociCalc 9600 Series User Manual

Operation and Service Manual 37
• Upstream measurements of Flow,
Temperature, and Humidity are
displayed. Press to capture
these upstream measurements.
o Press to accept the
upstream readings
o Press to retake
upstream readings
• After upstream measurement has
been accepted, place probe
downstream of the coil.
o Press to capture these
upstream measurements.
o Press to accept the
upstream readings
o Press to retake
upstream readings
• Press to save and close the
test ID.
Duct Traverse Procedure ( 9 6 5 0 , 9 650 -NB)
After connecting any TA Probe or
Pitot tube and selecting Workflows
from the Main Menu, select Duct
Traverse to view the Duct
Traverse Setup screen.
To add a new duct size press .

TSI Instruments VelociCalc 9600 Series Specifications

General

Brand	TSI Instruments
Model	VelociCalc 9600 Series
Category	Measuring Instruments
Language	English