TSL AMU2-2MA - Introduction; Front Panel Controls; Input and Meter Selection Buttons

AMU2-2MA MKIII 9 ISSUE 1
AMU2-2MA MKIII AUDIO MONITORING UNIT
1.0 Introduction
The AMU2-2MA MKIII is a 2RU x 300mm deep Audio Monitoring Unit with Sifam
PPM or VU meters.
The following features are standard:
? Two Sifam 32 style meters.
? Eight switch selectable stereo analogue inputs.
? Audio-present indication.
? Phase correlation indication.
? Phase reverse switch.
? Out-of-phase error indication.
? M and S PPM Switching.
? Optional additive output switch selection.
? Two x 18 Watt RMS into 4 ? loudspeaker amplifiers.
? Headphone outputs with LS muting.
? Fixed and variable stereo line outputs.
? RS422 remote control option.
? Legendable buttons
2.0 Front Panel Controls
2.1 Input and Meter Selection Buttons
1 – 8 Analogue I/Ps. A1 (Left Channel) is fed to the left meter
and A2 (Right Channel) is fed to the right meter.
M/S Displays the MIX (mono) signal on the left meter and the
SEPARATION (difference) on the right meter of the
selected Input.
Ø Rev Momentary phase reverse between A1 and A2.