TuffStuff CXT-225 - Safety Precautions: Key Mechanisms; Weight Lift Bar Locking; Weight Plate Loading; Safety Stopper Engagement Critical

CXT-225 Smith Press Attachment www.tu stu tness.com
Safety Precautions
3
1. The Weight Lift Bar (CXT-225 Owner’s Manual part #8)
has a twist locking mechanism that
out the
allows you to safely lock
Weight Lift Bar (CXT-225
at virtually
Owner’s Manual part #8)
any setting. See Fig. A
2. If you are adding or storing weight plates on the
Weight Prongs
(CXT-225 Owner’s Manual part #11, #12)
them. Allow enough space for weight
, do not over-load
purchased separately) See
collars. (Collars must be
Fig. B
3. Pay special attention to the
Safety Stoppers (CXT-225 Owner’s
Manual part part #2,#3). Be sure they are fully engaged into the
Prongs (CXT-225 Owner’s Manual part #6) Stopper of the
Side Frames (CXT-225 Owner’s Manual part #4,#5).
to
Refer
Fig. C illustration. for further
Fig. C Danger: Check that all Safety Stoppers
are fully engaged into the Stopper Prongs
Fig. A Illustration above depicts the Weight Lift
Bar locking mechanism.
Fig. B Warning:Use collars to prevent the weight
plates from falling off the Weight Prongs .
Weight Prong
Olympic Bar Collar
Barbell Weight Plates
Unlock
Lock