TuffStuff Apollo Series User Manual

ASSEMBLY INSTRUCTIONS
America’s Premier Exercise Equipment
Ab/Back Station Rev0
Apollo Modular Gym System
Ab/Back Station
Standard
Deluxe
Revision Date 08-23-05

TuffStuff Apollo Series Specifications

General

Type	Multi-Station Home Gym
Upholstery	High-density foam
Lat Pull-down Attachment	Yes
Leg Developer Attachment	Yes
Finish	Powder coat

Summary

Ab/Back Station Introduction

Product Overview and Warranty

Information regarding Tuff Stuff equipment, warranty, and registration.

Specifications and Tools

Details on product specifications and required tools for assembly.

Step 1: Side Frame Assembly

Assemble Side Frame Components

Instructions for attaching pulley brackets and side frames to the weight stack frame.

Step 2: Main Frame Assembly

Assemble Main Frame Components

Instructions for attaching pulleys, end caps, and side frames to the main frame.

Step 3: Pivot Arm and Foot Piece Assembly

Assemble Pivot Arm and Circular Plate

Attaching the pivot arm and circular plate assembly to the actuator arm.

Attach Foot Piece Assembly

Connecting the foot roll tube, foam rolls, and foot piece to the main frame.

Step 4: Swivel Foam Roll Tube and Seat Pad Assembly

Assemble Foam Roll Tube and Seat Pad

Attaching the swivel foam roll tube, collar, foam rolls, and seat pad.

Step 5: Cable Routing

Route Ab/Back Cable Through Pulleys

Detailed instructions for routing the cable through various pulleys.

Secure Cable to Actuator and Weight Stack

Securing the cable ends to the actuator arm and weight stack.

TuffStuff Warranty