To Next PageTo Next Page
Need help?Do you have a question about the TuffStuff Apollo and is the answer not in the manual?
General| Lat Pull-down Attachment | Yes |
|---|---|
| Leg Developer Attachment | Yes |
| Finish | Powder coat |
| Material | Steel |
| Type | Multi-station home gym |
Details maximum weight capacity, total machine weight, and footprint of the gym system.
Advises consulting retailers, considering space, and seeking assistance for assembly.
Lists all necessary tools for assembling the gym equipment.
Recommends consulting a physician before starting any new exercise program.
Warns about the danger of frayed or worn cables and the need for periodic checks.
Recommends inspecting the unit for wear, loose parts, or cracks, and ceasing use if issues are found.
Details attaching pulleys and components to the weight stack frame using specific hardware.
Describes connecting the press bar/pec fly and leg extension bottom frames to the weight stack frame.
Explains how to attach the leg press bottom and upright connectors to the weight stack frame.
Details inserting guide rods and rubber donuts into various stations on the weight stack frame.
Describes sliding weight plates onto the guide rods for the weight stack.
Explains how to assemble top plate selector bars with magnetic selector pins.
Details attaching pulleys to the press bar station base frame.
Describes attaching the front upright to the bottom connector press bar/pec fly.
Details attaching the top pulley assembly to the front upright.
Illustrates the routing of the lat cable through various pulleys and components.
Details the routing of the pec dec cable through pulleys and attachment points.
Shows the routing of the leg extension cable through pulleys and the weight stack.
Covers assembling the bench press seat frame and foot roll components.
Details attaching hinges, back pad, and handlebar grips for the station.
Explains attaching leg extension frames, arm support, and handles.
Advises inspecting and adjusting cables before installing weight shields.
Details inserting weight shields into the bottom holders.
Explains securing shields and holders to guide rod retainers.
Provides guidelines for daily cleaning, monthly polishing, and general inspection.
Focuses on inspecting cables, pulleys, and components for wear and proper function.
Details lubrication requirements for bearings, bushings, and linear motion components.
Outlines warranty terms for frame, moving parts, cables, and other components.
Details purchaser's responsibilities for installation, transportation, and costs.
Specifies limitations on TuffStuff's liability for damages and consequential losses.
