EasyManua.ls Logo

Tulip BrakeMate User Manual

Tulip BrakeMate
14 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Operating Manual
WARNING
Do not operate BrakeMate® before carefully reading and understanding
the operating and safety instructions contained in this manual.
Brake maintenance should only be undertaken by properly trained
personnel.
Standard workshop personal protection equipment should be worn.
®
Question and Answer IconNeed help?

Do you have a question about the Tulip BrakeMate and is the answer not in the manual?

Tulip BrakeMate Specifications

General IconGeneral
BrandTulip
ModelBrakeMate
CategoryTools
LanguageEnglish

Summary

Correct Application

Description of BrakeMate® System

System Overview

Overview of the BrakeMate® system components and their intended function.

Main Technical Data

Key technical specifications for the Hub/Rotor Trolley and Service Trolley.

Warnings and Safety Instructions

General Safety Prohibitions

List of actions and conditions to strictly avoid during operation.

Operational Safety Cautions

Important precautions for safe operation, including air supply and personnel awareness.

Daily Inspection

Operating Instructions

Vehicle Preparation

Steps for preparing the vehicle prior to using the BrakeMate® system.

Caliper Removal Procedure

Detailed steps for removing the brake caliper using the BrakeMate® system.

Hub/Rotor Removal Procedure

Steps to remove the hub/rotor assembly from the vehicle.

Hydraulic Puller Usage and Warnings

Critical guidance on using the hydraulic puller and important limitations.

Separating Hub and Rotor

Instructions for safely separating the hub from the brake rotor.

Rotor Change Over Procedure

Steps for replacing a brake rotor with a new one.

Hub/Rotor Assembly Refitting

Procedure for refitting the hub and rotor assembly to the vehicle.

Caliper Refitting Procedure

Steps for reinstalling the brake caliper onto the rotor.

Declaration of Conformity

Machine Identification and Compliance

Details of machine description, type, and adherence to EC Directive requirements.

Standards and Authorization

Confirmation of compliance with EU directives and relevant applied standards.

Warranty Statement

Warranty Coverage and Limitations

Explanation of warranty terms, exclusions, and limitations for equipment and parts.

Manufacturer Information

Contact details and manufacturing origin of the BrakeMate® system.