Tunze 7095 - Mounting the Photo-Electric Cell

57
Mounting the photo-electric cell
(1) Premount the clamp holder.
Use the front M5x40 mm (1.57 in.) plastic screw
to set the glass thickness. Tighten the M5x40 mm
(1.57 in.) clamping screw.
Use a hose clamp (4), the M6x16 mm (.62 in.)
screw (5) and the M6 nut (6) to safely attach the
photo-electric cell to the clamp holder.
Ensure a tight t !
Spare parts:
(1) 3000.240 Clamp holder
(4) 7095.051 Cable clamp 3mm
Fixation de la cellule photo
(1) Pré-montez le support.
Réglez l’épaisseur de verre à l’aide de la vis plastique
avant M5 x 40mm (2).
Serrez la vis M5 x 40mm (3).
La cellule photo se xe au support de manière sûre
par le collier (4), la vis M6 x 16mm (5) et l’écrou M6
(6).
Vériez la bonne assise du support sur l’aquarium !
Piéces:
(1) 3000.240 Support
(4) 7095.051 Collier 3mm