EasyManua.ls Logo

Turbines, Inc. CDS1000 - Wiring Connections; Power, Signal, and Temperature Wiring; Pressure, PCO, and Output Wiring

Turbines, Inc. CDS1000
21 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Turbines Incorporated Cryogenic Flow Delivery System CDS1000 Manual (Rev E)
CDS1000 Page 17
Wiring
CDS1000 Wiring Connections
Power Signal Temp
Function Color Function Color Function Color
1 Power1 Brown 1 Coil1 + Brown 1 RTD S- Brown
2 N/C N/C 2 Coil1 - White 2 RTD O- White
3 Power 2 Blue 3 Coil2 + Blue 3 RTD O+ Blue
3 Power 1 Black 4 Coil2 - Black 4 RTD S+ Black
5 Internal GND Grey 5 N/A Grey
6 N/A Pink
CDS1000 Wiring Connections (cont)
Pressure PCO Output (RS-232)
Function Color* Function Color Function Color
1 Pressure Input (4-20mA) + Brown Brown 1 Pump NC Brown 1 RTS N/C
2 Pressure Input (4-20mA) - White White 2 Pump C White 2 CTS N/C
3 Internal GND Blue Blue 3 Pump NO Blue 3 RX Red
4 Rate Output (4-20mA) - Black Black 4 Alarm NC Black 4 TX White
5 Rate Output (4-20mA) + Grey Green/Yellow 5 Alarm C Grey 5 Internal GND Black
6 Alarm NO Pink
Wire colors are for standard Turbines Inc. supplied cables.
Caution: Do not connect the “Internal GND” connections to the truck/trailer DC ground
(chassis).
NC – Normally Closed Contact
C – Common Contact
NO – Normally Open Contact
*Two wire colors are listed for the 4-20mA because two cables could be provided. They are
electrically equivalent.