Turbines, Inc. CDS1000 User Manual

Model CDS1000
Installation and Operation
Also covers the CDS1000-B
PO Box 933, 15935 US Hwy 283 N.
Altus, OK 73522-0933
Seneca: 864-882-4544
http://turbinesincorporated.com
Manual part number 900484
Revision E
Copyright 2013-2016 Turbines Inc. All rights reserved.
Information contained herein is subject to change at any time without prior notice.

Turbines, Inc. CDS1000 Specifications

General

Brand	Turbines, Inc.
Model	CDS1000
Category	Measuring Instruments
Language	English

Summary

Warranty Information

Product Description and Operation

Theory of Operation

Explains the working principle of the turbine flowmeter and temperature compensation.

Operational Modes

Details the three operational modes: Operating, Programming, and Prove.

Installation Guide

Unit Operation

Programming the CDS1000

Clock and Language Setup

Calibration and Product Configuration

Sets Kfactor, linearization, product type, and measurement units.

System Settings and Parameters

Maintenance and System Logs

Print and Communication Settings

Technical Specifications

Hardware Specifications

Software Specifications

Troubleshooting Common Issues

Connection and Power Issues

Diagnoses problems related to power supply, battery, and cable connections.

Sensor Fault Diagnosis

Guides on identifying and resolving issues with coil and RTD sensors.

Maintenance and Turbine Meter Checks

Wiring Connections

Power, Signal, and Temperature Wiring

Pressure, PCO, and Output Wiring

Field Calibration

Calibration Methods and Kfactor Calculation

Explains calibration techniques and the formula for calculating a new Kfactor.

Programming a New Kfactor

Details the steps to input the calculated Kfactor into the CDS1000.