A-2 APPENDIX REPLACING OVEN COMPONENTS
Figure
Reference #
Item Description Item Part Number Fastener Description
Fastener Part
Number(s)
1 Blower Motor* FRE-3001 (x2) Screw, PPH, SS, M5x25mm LGx .8mm 101344 (qty 2)
2 Catalytic Converter FRE-1019
Screw, SH MTL, #8 x 1/2 Serrated PHTRH
Bracket, Catalyst Holder
101688 (qty 4)
FRE-1013 (qty 2)
3 Control Board FRE-3006 Screw, PFH, SS, M4x35mm LGx .8mm 101439 (qty 6)
4 Cooling Fan, Controls FRE-1046
Screw, PPH, SS, M4x30mm LGx .8mm
Nut, Hex, SS, M4
101699 (qty 2)
101004 (qty 2)
5 Cooling Fan, Rear 100516 (x2)
Screw, #10-32x1/2, Hex WSHR HD, Type 23
(Shared with Finger Guard)
101408 (qty 4)
6
8
18
2
30
16
17
2333
32
29
15
1
1
28
13
26
14
22
7
27
31
11
3
20
21
9
4
10
19
24
24
5
5
12
12
Replacing Items
DANGER: Before replacing any oven component, ensure the oven is removed from any power
source. Replacing a component while the oven is plugged in can result in serious injury or death
CAUTION: Be careful to not tear the insulation when servicing components. Always reinstall the
insulation properly before reinstalling the outer shell.
NOTE: Fasteners listed are required for installing component to oven.
*Ensure that the blower motor is properly aligned.
(x4)
(x2)
To Next Page
Loading...
