turbofan EC40D10 User Manual

14
6.6 • SELECTING CYCLE 2 AND
SUBSEQUENT (UP TO 4 CYCLES)
Press button 11, the second flashing LED
on the button will turn on. Set as per
paragraph 6.3. If additional phases are
needed, follow the same sequence.
Once the last cycle has been set, wait 10
seconds to confirm the cycle settings.
On button 11, the set cycle leds will
remain fixed.
6.7 • RECORDING THE PROGRAMME
Press button 11 for 3 seconds, display 7 will
read [REC], press button 6 to confirm.
The number where the cooking programme
has been saved will be shown on display 7.
6.8 •
STARTING THE SET PROGRAMME
Press the flashing cooking mode button
(2 - 3 - 4) to start cooking. The cooking
mode led will remain lit with a fixed light.
6.9 • SETTING A NEW COOKING LEVEL
If you wish to set a new cooking level, the
previous programme must be reset. Press
button 11 for 3 seconds, display 7 will
read [ESC]. Confirm the reset by pressing
button 9. Flashing cooking mode LEDS
indicate that the programme has been
reset.
OPERATIONS
6 • SETTING A PROGRAMME WITH SEQUENTIAL CYCLES (UP TO 4)
240066-1

turbofan EC40D10 Specifications

General

Brand	turbofan
Model	EC40D10
Category	Oven
Language	English