25
240066-1
OPERATIONS
PREMISE
During cooking (fixed led light) the displays
show the real values (of the current
situation).
It is nonetheless possible to check the set
values. To do this, perform the following
actions:
16 • OPERATING DETAILS
16.1 • VIEWING SET
VALUES DURING
COOKING (without stopping)
Press button 11, the displays will flash,
showing the values previously set. After
10 seconds (TIME OUT) the real values will
reappear, therefore in general:
flashing display: set value.
fixed display: real value.
16.2 • MODIFYING SET VALUES
DURING COOKING
(WITHOUT STOPPING)
See “Section 11 - Temporarily
Modifying a Recorded Programme /
Recipe”.
16.3 • TEMPORARY STOP
Open door. Cooking will stop, the time
counter will stop until the door is closed
again. Cooking will automatically restart
from the point where it was interrupted.
16.4 • PERMANENT STOP
To stop infinite time cooking or to
permanently interrupt cooking, press the
active cooking mode button (led lit) for 3
seconds.
To Next Page
Loading...
Need help?
General
