32
21
•
SPECIAL PROGRAMMES
CLEANING KIT
21.3 • REPLACING THE DETERGENT
CARTRIDGE
If when calling up the automatic wash
procedure ECO [ECo], SOFT [SC],
MEDIUM [MC], or HARD [hC], display 8
shows [dEt] flashing, check the amount of
detergent in the cartridge.
If the cartridge is empty change it, otherwise
press button 9 to proceed with the wash.
REPLACING THE CARTRIDGE:
Unscrew the cap of the empty cartridge and
remove it.
Position the new cartridge in its dedicated
housing in the oven.
IMPORTANT: Wait for the liquid to
stabilise before opening the cap.
Remove the cap from the new cartridge
and insert the tube with the YELLOW cap,
making sure that the tube is facing the
front part of the cartridge, and close the
cap well.
Press button 9 for three seconds (until [dEt]
disappears from the bottom display) to
reset the detergent level to the maximum.
Press button 9 to start the wash.
240066-1
To Next Page
Loading...
Need help?
General
