user manual
TA-890
TA-890 user manual
Page 34
Integral Flying Hardware
Aspect cabinets are flown and connected in vertical columns by means of the integral flygear
that is rebated into the cabinet sides. In this way the load of the cluster is taken entirely
through the steelwork and not through the box. It essentially consists of a moveable drop link
that engages into a receptacle in the cabinet below with a choice of inter-cabinet angles.
All parts of the flygear are fitted flush with the woodwork of the cabinet, and can quickly and
easily be removed for safety testing.
The following diagram decribes the various parts of the flygear.
‘A’ System Flygear
TOP OFCABINET
DROP LINK
LATCHTRIGGER
To Next Page
Loading...
