EasyManuals Logo

Turbosound MANCHESTER Series Quick Start Guide

Turbosound MANCHESTER Series
12 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #2 background imageLoading...
Page #2 background image
2 Manchester Series MAN210-FG/MS121/MV210-HC Quick Start Guide 3
Welcome
Thank you for choosing a Turbosound loudspeaker product for your application. If you would like further information about this or any other product,
please visit our website at turbosound.com.
Unpacking theLoudspeaker
After unpacking the unit, please check carefully for damage. If damage is found, please notify your supplier at once. You, the consignee, must instigate any claim.
Please retain all packaging in case of future returnshipment.
System Requirements
The MV210-HC is a bi-amp 3-way loudspeaker with a passive crossover used on the mid and high frequency bands. It requires 2 channels of amplier and DSP.
With these Lake XP-based pre-sets, the Module Output Mixing (MoM) setup is no longer used, but instead, these pre-sets utilize the 3 band Multiband on each of the
Module outputs.
The MS121 subwoofer requires 1 channel of amplier and DSP for normal forward ring operation. Cardioid bass set ups will require additional amplier and DSP channels.
All Manchester series Loudspeakers exclusively use LAKE pre-sets via Lab Gruppen PLM+ and D series L platforms. No other amplier and DSP platforms are supported.
Manchester series has a powerful yet simple pre-set strategy utilizing the latest functionality of LAKE software, along with new acoustic compensation for length
of array and throw distances required (explained later in this QSG).
Pre-set data is found either via the Lake Load Library or can be downloaded from www.turbosound.com
Recommended Lab Gruppen PLM+ models for Touring applications are the PLM12k44 and PLM20k44.
For installations using Lab Gruppen D series L models, please use Lab Gruppen ‘CAFE’ software - available for download from www.labgruppen.com -
to determine the optimum amplier conguration for your system.
System Cabling Requirements
To avoid wasting amplier power, you should use heavy-duty speaker cable with a minimum wire size of 2.5 mm² (14 AWG), and preferably 4 mm² (12 AWG)
for longer runs or where total cabinet input impedance is less than 8 ohms. For extreme cable lengths, be aware of cable impedance and resistive losses.
Always observe the correctpolarity.
Use genuine NEUTRIX SPEAKON CONNECTORS for reliable operation.
(EN) Safety Instruction
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with dry cloth.
7. Do not block any ventilation openings. Install in
accordance with the manufacturer’s instructions.
8. Do not install near any heat sources such
as radiators, heat registers, stoves, or other apparatus
(including ampliers) that produce heat.
9. Use only attachments/accessories specied
by the manufacturer.
10. Use only with
the cart, stand, tripod,
bracket, or table specied
by the manufacturer, or
sold with the apparatus.
When a cart is used,
use caution when moving
the cart/apparatus
combination to avoid injury from tip-over.
11. Correct disposal of this
product: This symbol indicates that
this product must not be disposed
of with household waste,
according to the WEEE Directive
(2012/19/EU) and your national
law. This product should be taken
to a collection center licensed for
the recycling of waste electrical and electronic equipment
(EEE). The mishandling of this type of waste could have a
possible negative impact on the environment and human
health due to potentially hazardous substances that are
generally associated with EEE. At the same time, your
cooperation in the correct disposal of this product will
contribute to the ecient use of natural resources. For
more information about where you can take your waste
equipment for recycling, please contact your local city
oce, or your household waste collection service.
12. Do not install in a conned space, such as a
book case or similar unit.
13. Do not place naked ame sources, such as lighted
candles, on the apparatus.
LEGAL DISCLAIMER
Music Tribe accepts no liability for any loss which may
be suered by any person who relies either wholly or in
part upon any description, photograph, or statement
contained herein. Technical specications, appearances
and other information are subject to change without
notice. All trademarks are the property of their
respective owners. Midas, Klark Teknik, Lab Gruppen,
Lake, Tannoy, Turbosound, TC Electronic, TC Helicon,
Behringer, Bugera, Aston Microphones and Coolaudio
are trademarks or registered trademarks of Music
Tribe Global Brands Ltd. © Music Tribe Global Brands
Ltd. 2023 All rights reserved.
LIMITED WARRANTY
For the applicable warranty terms and conditions
and additional information regarding Music Tribe’s
Limited Warranty, please see complete details online at
community.musictribe.com/pages/support#warranty.

Other manuals for Turbosound MANCHESTER Series

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Turbosound MANCHESTER Series and is the answer not in the manual?

Turbosound MANCHESTER Series Specifications

General IconGeneral
BrandTurbosound
ModelMANCHESTER Series
CategorySpeakers
LanguageEnglish

Related product manuals