user manual
TFS-780
TFS-780 user manual
Page 24
An alternate arrangement is to stack the bass enclosures with a curve similar to the flown
array above it, giving a strong, punchy low end with even dispersion. The first row are
stacked door to the floor, with remaining bins alternately inverted in rows six across and
three high. The bass stack should be placed slightly apart from the stage, with the inside
column pointing directly at the mix position. The remaining columns are splayed evenly with
a 6” to 8” gap between each column. This arrangement works well for house and dance
music. A TFL-760HM placed on the stage edge gives excellent front fill coverage.
Tall, thin bass stacks work best, preferably in blocks of eight bins high by two wide. When
space permits use two of these blocks, the onstage block flush with and parallel to the stage,
with a second identical offstage block slightly separated from the first and angled outwards
by 10
°
.
To Next Page
Loading...
Need help?
General