turck Li-Q25LxE Series - Technical Accessories

10
Hans Turck GmbH & Co. KG | T +49 208 4952-0 | F +49 208 4952-264 | more@turck.com | www.turck.com
4.5 Technical accessories
Dimension drawing Type Ident No. Description
Positioning element
40,4
20
40
20,7
28,8
35,3
M5
M5
8
reference
point
P1-Li-Q25L 6901041 Guided positioning element for Li-
Q25L, is guided in the groove of the
sensor
12
35,5
32
23
21,5
4,5
4,5
ø 5,2
(4x)
26,3
12,5
reference
point
P2-Li-Q25L 6901042 – Free positioning element for Li-Q25L
– The nominal distance to the sensor
is 1.5mm.
– Coupling with the linear position
sensor possible at a distance of up
to 5 mm or a lateral offset of up to
4mm possible
12
35,5
32
23
21,5
4,5
4,5
ø 5,2
(4x)
26,3
16
reference
point
P3-Li-Q25L 6901044 – Free positioning element for Li-
Q25L, operational at 90° offset
– The nominal distance to the sensor
is 1.5mm.
– Coupling with the linear position
sensor possible at a distance up to 5
mm or a misalignment tolerance of
up to 4mm possible
14
28
23
11,1
35,8
19,9
7
9
ø 4,4
(4x)
reference point
P6-Li-Q25L 6901069 – Free positioning element for Li-Q25L
– The nominal distance to the sensor
is 1.5mm.
– Coupling with the linear position
sensor possible at a distance up to 5
mm or a misalignment tolerance of
up to 4mm possible