Need help?Do you have a question about the Turnigy 4x100W and is the answer not in the manual?
Features adjustable settings and AUTO charge for user safety and ease.
Built-in balancer eliminates the need for an external unit.
Monitors and balances individual cells during discharge, alerting for abnormalities.
Supports charging of LiPo, LiFe, and Li-Ion batteries.
Offers modes to reduce charging time or prepare batteries for long-term storage.
Utilizes Delta-peak sensitivity to prevent overcharging.
Automatically stops charging when user-specified capacity is reached.
Automatically terminates processes if a set time limit is reached.
Stores up to ten charge/discharge profiles for quick recall.
Automates up to 5 cycles for battery refreshing and balancing.
Allows users to adjust the end voltage for charging/discharging.
Enables checking total, highest, lowest, and individual cell voltages.
Table detailing nominal, max, storage, and discharge voltages for various battery types.
Connects charger first, avoid multiple batteries, and lists types of batteries not to charge.
Verifies correct battery type, current, and secure connections before charging.
Explains energy input, current calculation, lead requirements, and manufacturer instructions.
Explains residual capacity measurement, avoiding deep discharge, and memory effect for NiCd/NiMH.
Details power input cables and required power supply specifications for connecting the charger.
Emphasizes parameter check before connection and correct sequence to avoid short-circuits.
Guides on connecting the balance wire, maintaining correct polarity, and its use in balance charge mode.
Balances cell voltages during charging using a balance lead for normalized charging.
Standard charging mode for Li-Po/Ion/Fe batteries without a balance lead.
Accelerates charging by reducing CV process duration, potentially reducing capacity slightly.
Charges or discharges lithium batteries to optimal storage voltage based on type.
Guides on setting discharge current and final voltage, avoiding deep discharge.
Details charging parameters for Pb batteries, emphasizing slow charging and 1/10 capacity current.
Explains setting discharge current and final voltage for lead-acid batteries.
Describes charging NiCd and NiMH batteries using user-set current for R/C applications.
Outlines setting discharge current and final voltage for NiCd/NiMH batteries.
Details setting up charge/discharge cycles for battery conditioning, with adjustable number of cycles.
Guides on entering battery memory, setting type, voltage, and current for up to 10 profiles.
Instructions on how to save a configured program and recall previously saved profiles.
Configures rest time, safety time, and capacity cut-off settings for charging/discharging processes.
Manages key beep, input power cut-off, internal temperature display, and loading factory settings.
Shows the serial number and software version of the charger unit.
Instructions on how to enter the LiPo Battery Meter function.
Displays individual cell voltages within a LiPo battery pack.
Shows total, highest, and lowest voltages for the LiPo battery pack.
Shows the final voltage and present input voltage during the process.
Indicates internal temperature and status of safety timer and capacity cut-off.
Allows checking individual cell voltages when a balance lead is connected.
Covers reverse polarity, connection breaks, and general connector errors.
Addresses short circuits, low input voltage, and high input voltage errors.
Details errors for individual cell voltage (low/high) and incorrect connector setup.
Covers internal temperature issues and processor control failures.
Addresses invalid balance port usage and battery voltage exceeding settings.
Lists operating voltage, charge/discharge power, and current ranges.
Details cell counts supported for various battery types and balancing current drain.
Provides net weight, dimensions, and a list of included accessories.
Outlines the one-year warranty coverage and exclusions for material or operational defects.
General| Brand | Turnigy |
|---|---|
| Model | 4x100W |
| Category | Battery Charger |
| Language | English |
To Next Page
