Turnigy REAKTOR - User Manual

  
Please use these instructions for the 120 Duo
version. The programming and menus are the
same, the difference is the Duo has the ability to
charge 2 batteries so has 2 screens and 2 sets of
menu buttons.

Summary

Specifications

Special Features

Warnings and Safety Notes

Parameter Setup

Lithium Battery Parameters

Configuration options for Lithium batteries including check time, balance speed, and balance modes.

NiMH;NiCd;Pb Battery Parameters

Lithium Battery Program

Balance Charging Options

Explains balance charging modes (Normal, Fast, Slow) and connection requirements.

Basic Charging Modes

Storage and Discharge Operations

NiCd;NiMH Battery Program

Charging NiCd;NiMH Battery

Instructions for charging NiCd and NiMH batteries with auto or manual modes.

Discharging NiCd;NiMH Battery

Procedure for discharging NiCd and NiMH batteries, setting current and final voltage.

NiCd;NiMH Cycle Modes

NiCd;NiMH Forming Charge

Pb(lead-acid) Battery Program

Charging a Pb Battery

Guidelines for charging lead-acid batteries, including current and cell count settings.

Discharging a Pb Battery

Procedure for discharging lead-acid batteries, setting current and cell count.

Measuring Internal Resistance of the Battery

Error Messages

Turnigy REAKTOR Specifications

General

Charge Power	300W
Memory Slots	10
Input Voltage	11-18V DC
Charge Current Range	0.1~20.0A
Discharge Current Range	0.1~5.0A
LiPo/LiFe/LiIon Cell Count	1-6S
NiMH/NiCd Cell Count	1-15S
Pb Battery Voltage	2-20V
Current Drain for Balancing Li-po	300mA
Cooling	Fan