Need help?Do you have a question about the Turnigy Reaktor 300W 20A and is the answer not in the manual?
Sets battery temperature limit to prevent damage.
Stops charging/discharging when a set capacity is reached.
Sets lower limit for input voltage to prevent damage.
Sets termination voltages for LiPo, LiFe, and Lilo battery types.
Sets termination voltages for LiHV, LiXX, and Pb battery types.
Manual and auto charging modes for NiCd/NiMH/NiZN batteries.
Setting discharge current and final voltage for NiCd/NiMH/NiZN.
Covers TEMPCUTOFF, CAPCUTOFF, INTERTEMPCUTOFF.
General| Power Output | 300W |
|---|---|
| Current Output | 20A |
| Battery Types Supported | LiPo, LiFe, LiIon, NiCd, NiMH, Pb |
| Charge Current Range | 0.1-20A |
| Discharge Current Range | 0.1-5A |
| LiPo/LiFe/LiIon Cell Count | 1-6 cells |
| NiCd/NiMH Cell Count | 1-15S |
| Pb Battery Voltage | 2-20V |
To Next Page
