Need help?Do you have a question about the Turnigy Accuel C150 and is the answer not in the manual?
Charges battery to termination voltage and balances cells. Balance port connection required.
Charges battery via CC-CV mode to termination voltage, stops at 1/10 current.
Charges battery via CC-CV mode to termination voltage, stops at 1/5 current.
Charges or discharges battery to storage voltage. Specific voltages for LiPo, Lilo, Life.
Discharges battery to the termination voltage.
Shows battery type, cell count, current, voltage, timer, and capacity.
Displays detailed status like capacity cutoff, safety timer, temperature, input voltage.
Automatically detects cell count and charges battery to termination voltage.
Discharges the battery to the termination voltage.
Charges and discharges battery per user settings for current and cell count.
Shows NiMH/NiCd battery type, count, current, voltage, timer, capacity.
Displays NiMH/NiCd status like capacity cutoff, safety timer, input voltage, sensitivity.
Charges the lead-acid battery to the termination voltage.
Discharges the lead-acid battery to the termination voltage.
Shows Pb battery type, count, current, voltage, timer, capacity.
Displays Pb status like capacity cutoff, safety timer, input voltage, end voltage.
Controls key sound, buzzer volume, and beep settings.
Sets the duration of the completion alert sound or silence.
Sets the pause time between charge/discharge in NiMH/NiCd cycle modes.
Sets the minimum input voltage to protect the power supply.
Sets the maximum external temperature cutoff for battery protection.
Sets the maximum capacity cutoff to protect the battery from overcharging.
Sets a safety time limit for charger and battery operation.
Sets the maximum charge power to match the power supply capacity.
Configures balance control for LiPo/Lilo/LiFe: Standard, Fast, or Accurate.
Resets all user settings to their factory default values.
Sets termination voltage per cell for various battery types.
Measures and displays LiPo/Lilo/LiFe battery status like voltage and capacity.
Measures and displays internal resistance for LiPo/Lilo/LiFe batteries.
Balances LiPo, LiIo, LiFe, LiHV battery packs.
Sets and displays output voltage, current, and time for digital power output.
Controls and displays parameters for brush motor driving.
Covers errors related to input voltage being too high or too low.
Addresses reverse polarity and battery disconnect errors.
Covers over/under voltage for total battery and individual cells.
Addresses errors related to cell count mismatch and over capacity.
Covers errors related to safety timer expiry and external temperature cutoff.
Outlines the one-year product warranty and its conditions.
Details limitations of liability for misuse or incorrect operation of the charger.
General| Max Discharge Power | 5W |
|---|---|
| Ni-xx Cell Count | 1-15 Cells |
| Pb Voltage | 2-12V |
| Weight | 320g |
| Balance Port | Yes |
| Memory Functions | Yes |
| Charge Current | 0.1-5.0A |
| Discharge Current | 0.1-1.0A |
| Battery Types Supported | LiPo, NiMH, NiCd, Pb |
| Li-xx Cell Count | 1-6 Cells |
| Cooling System | Fan |
To Next Page
