www.participate.co.za
@participateSA
facebook.com/participateSA
QT DEVICE
+27 (0) 861 10 63 65
info@participate.co.za www.participate.co.za
CONTACT US
QT Device 1
QT DEVIC E
The QT Device is an audienc e response dev ice with a full QWERTY style keyboard used for immediate feedback or Self-
Paced Testi ng. The QT Device is c ompatible with Turning Technologi es RF+ receiver (RRRF-03) and RF receiver (RRRF-04)
and with TurningPoint 5, TurningPoint Cloud, Flow (2.0 or higher) and Insight 360 (Student ID Login mode only).
Presentation Mode
TIP
Expose the QT Device to
natural or artificial light to
charge the "glow in the dark"
keyboard.
The Toolbox
Send Message - Send a message to the presenter. The presenter is
unable to respond via the same method.
NOTE
The presenter may have this feature disabled in the
software. If disabled, you will see "Not Open" when
trying to send a message.
Your ID - Assigns an alphanumeric identification to device.
Settings - Press the function key below OK to open the settings and
use the right or left arrow keys to scroll through the opti ons.
Device Info - Press t he function key below OK to display the
Device ID. P ress the right arrow once to display the firmware
version and l anguage.
Contrast - Press the function key below OK and use the left
or right arrows to adjust the contrast of the objects. Press the
function key below OK to save.
Brightness - Press the function key below OK and use the
left or right arrows to adjust the LCD display on the QT Device.
Press the f unction key below OK to save.
Manually Changing the Channel
Use the steps below to manually set the channel or use the Find Channel function to find a receiver within range.
WARNING
If the
lock symbol appears next to the channel number, the channel cannot be changed.
1
Press the Channel
button.
2
Use the number pad to enter the new channel number.
3
Once the channel number has been entered, press the function k ey below OK.
TIP
Alternatively to selec t an option, press the Enter key.
To Next Page
Need help?
General