Turning Technologies QT - Changing the Channel; Logging into a Test; Navigating Through Questions; Scrolling through questions

QT Device 4
Changing the Channel
Before logging into a test, the QT Device mus t be on the same channel as the receiver.
1
Press the Channel
button.
2
Use the number pad to enter the new channel number.
3
Once the channel number has been entered, press the function k ey below OK.
Logging into a Test
1
Press a button on the QT Device to " wake up" the device.
2
The Welcome Screen is displayed followed by the Battery Indicator Screen.
3
You may be prompted f or Your ID.
a
Press the Backspace key to clear the information displayed.
b
Use the keyboard and/or number pad to enter Your ID.
c
Press the function key below OK.
4
You may be prompted f or Test Version.
a
Locate the Test Version number on the paper test.
b
Use the number pad to enter the Test Version.
c
Press the function key below OK.
The test name, v ersion number (if applicabl e) and question
count are displayed.
5
If the information displayed is c orrect, press the function k ey below OK.
If the information is incorrect, press the far left function key, verify that the QT Device is on the correct channel and
begin the process from step 1.
You are now in Test Mode.
Navigating Through Questions
Scrolling through questions...
1
Use the left and right arrows to scroll back or forward through t he question rolodex.
Go to a specific question...
1
Press
on the keypad.
2
Use the arrow keys to highlight the Go to Question
ic on and press the function key below OK.
3
Use the number pad to enter the question number.
4
Press the function key below OK.
www.participate.co.za
@participateSA
facebook.com/participateSA
+27 (0) 861 10 63 65
info@participate.co.za www.participate.co.za
CONTACT US