TUSHY Ace - Page 10

1918
STEP 4: Connect to the water line
a. Disconnect the existing flexible
hose from your toilet tank by turning it
clockwise if you’re looking at the con-
nection from above. Be prepared to
catch or wipe up some residual water
that might spill onto the floor.
b. Screw the existing flexible hose to
the bottom of the Tank Adapter and
then screw the top of the Tank Adapt-
er counter-clockwise onto the tank if
you’re looking from above. Be careful
not to overtighten!
c. Screw the provided Flexible
TUSHY Ace Hose to the Tank
Adapter’s side connection.
Be careful not to overtighten!
If you don’t have access to the tank connection, you will need a valve
adapter for installation at the shuto valve at the wall or the sink
instead. Check out our installation video at hellotushy.com/valveadapter
and email us at aceinstall@hellotushy.com for that part.
Got a hard metal pipe instead of a flexible hose connected to your toilet?
No problem! You can swap that hard metal pipe out and replace it
with the Flexible TUSHY Ace Hose included in your TUSHY Ace spare
parts kit!
Toilet tank
Inlet
Inlet
Connecting Your TUSHY Ace
TUSHY TIPS
WARNING: Connect to cold water line only (not the hot water line).