TUYA G12 - Wireless Accessory Pairing; Pairing Wireless Siren; Pairing Wireless Switch; Automation and Timers

8
Here’re some of menus how to use.
Siren Learn
Sending a transmission signal to the wireless siren be paired
Alarm Socket
Pairing a wireless switch that syncing on/off with the siren
Socket Timer
Setting a schedule(in 24-hour) for opening/closing wireless switch
automatically
Decoder
Read the serial number of detector from its transmitting signal.
You can know which wireless accessory were paired in your hub by
this tool.
Wi-Fi
(Available on hub cellular+Wi-Fi model only)
Smart
Configuration
Connecting your bub to the Wi-Fi network and internet by Smart
Configuration(Requires the mobile APP)
Unbind
Unbinding the hub link from the server
MAC/IP
Getting the MAC and IP addresses of the Wi-Fi module
SoftAP
Configuration
Connecting your bub to the Wi-Fi network and internet by Soft AP
Configuration(Requires the mobile APP)
Record
Record
Recording voice message and playback
Play
Listening to the recorded message
Delete
Deleting the recorded message
Duration
Adjusting Record Duration (1-20 seconds is available)
Timer
Arm
Timer/Schedul
e
Setting a schedule(in 24-hour) for arming automatically
Disarm
Schedule
Setting a schedule(in 24-hour) for disarming automatically
Zone&Sync
Reserved
Date&Time
Setting the date and time(in 24-hour)
Wi-Fi Sync
Turning using the Wi-Fi network-provided time on or off
(hub cellular+Wi-Fi model only)
2G/4G Sync
Turning using the cellular network-provided time on or off
Version
Getting the firmware and Serial Number of hub, the firmware and
IMEI of the GSM module, and MAC address of the Wi-Fi module
(hub cellular+Wi-Fi model only)
Item
Caption
Description
1
Exit/Entry Delay
Your security system has been programmed with delay times
that allow you to exit the premises after arming, and to disarm
the system upon entry before an alarm occurs. If you leave
home too late when exiting, or disarm too late when arriving
home, it will cause a false alarm. If an false alarm occurs, you