PIR Motion Detector
The motion detector is designed for the usage on interior walls and is set to Out Arm Active Mode in
default. Whenever the sensor detects movement (only while the alarm is armed), a push notification
including the sensor name will be automatically sent to the registered users, and the alarm will sound.
Mounting strips
Attaches sensor and
magnet to a flat surface.
LED Indicator
Blinks for 30 seconds after
detector powers on. Lights up
when there’s motion in the
room. And blinks in case of low
battery, please replace the
battery soon.
Pairing button
Press it to send a
transmission signal for
pairing with your hub.
To Next Page
Loading...