TVLogic LVM-182W User Manual

Multi Format LCD Monitor 37
7. Button Functions
● LVM series monitor supports HDMI/DVI
digital input signal.
1. Press [HDMI] in front of the monitor and
activate OSD menu as the left photo.
Select input you would like to use by Knob
or UP/DOWN KEY and press the knob.
2. There is current input signal on bottom of
OSD.
3. Press [HDMI] again, then OSD menu
disappears.
#If no image displays after selecting the
desired input mode, check and make sure
that your connection is not lose or
disconnected.
● LVM series monitor supports two HD/
SD/3G-SDI inputs.
1. Press [SDI-A] or [SDI-B] in front of the
monitor.
2. There is current input signal on bottom of
OSD.
3. Press [SDI] again, then OSD menu
disappears.
#If no image displays after selecting the
desired input mode, check and make sure
that your connection is not lose or
disconnected.
[2] DIGITAL INPUT [3] SDI INPUT

TVLogic LVM-182W Specifications

General

Brand	TVLogic
Model	LVM-182W
Category	Monitor
Language	English