To Next Page

To Previous Page

7. Other Functions

[6] Focus Assist

• Focus Assist function assigns a color to the

pixels in the shape or the boundary of the

image to inform the user to achive the

best focus.

- With this function, user can easily dierenciate

the focused area from the out-focused area

especially when shooting with a shallow depth

of eld.

- Available types are [Mono] and [Color] types.

[Mono] : Background image is mono type.

* [Color] : Background image is original color type.

[7] Range Error

• Pixels with Y’ or C’ levels exceeding the

designated levels of Y MAX, Y MIN, C MAX

and C MIN shall blink.

- Analyzes the input signal’s Luma(Y’) and

chroma information(C’) and if the input signal

exceeds the designated minimum value and

maximum value, the pixel shall blink. This

function is to help the user to easily nd out

any unwanted level of signals and for a better

exposure setting.

* In the case of RGB input, Range Error is not

supported.

TVLogic R-5T User Manual

Questions and Answers: