Need help?Do you have a question about the TVLogic XVM-175W and is the answer not in the manual?
Supports diverse SDI and analog input signals.
Features remote control, communication protocols, and advanced signal support.
Includes wide screen display, DVI/HDMI input, AC/DC power, and viewing angle.
Identifies and labels controls on the front of the XVM-175W monitor.
Details the various input/output connectors on the rear of the XVM-175W.
Explains the function of each button on the XVM-175W front panel.
Describes functions of F1-F5 buttons, MENU/EXIT, UP/DOWN/ENTER knob, USB, and PHONE JACK.
Identifies and labels controls on the front of the XVM-325W monitor.
Details the various input/output connectors on the rear of the XVM-325W.
Explains the function of input selection and function buttons on the XVM-325W front panel.
Details functions like STANDBY, POWER, USB, PHONE JACK, CONTRAST, BRIGHT, APERTURE.
Explains the structure of the On-Screen Display (OSD) menu for navigation.
Details the use of specific buttons for controlling the OSD menu.
Provides a step-by-step guide for navigating and operating the OSD menu.
Identifies and explains the components of the main menu window.
Adjusts brightness, contrast, chroma, phase, aperture, NTSC setup, and aspect.
Configures dithering, filter, fast mode, psf, film detection, and SDI format.
Controls color temperature, gain, bias, and color copy.
Manages display ratio, time code, orbiter circuit, screen select, and caption settings.
Configures General Purpose Interface for remote control and tally signals.
Configures monitor ID, UMD display modes, and UMD characters.
Sets tally type configurations and color selections for tally signals.
Explains default tally type configurations for S-8C/S-16C and D-8C.
Configures user color selections for tally signals.
Sets a password for secure program download via Ethernet.
Configures network settings (IP, Subnet, Gateway, Port) and remote control.
Customizes UMD display appearance, including character color, transparency, font size and type.
Manages marker types, safety areas, and display parameters.
Adjusts horizontal and vertical positions for user-defined markers.
Configures Waveform and Vectorscope display, intensity, and line settings.
Manages range error display and blinking for Y and C signals.
Controls embedded audio level meters, volume, and output settings.
Manages user configurations, lock settings, and OSD display.
Configures functions for F1-F5 buttons and manages key LED and lock status.
Manages the operation of the monitor's cooling fan.
Displays board version and current status information.
Sets up Analog input signals like Composite, S-Video, Component, RGB, DVI, and HDMI.
Explains and configures various aspect ratio modes for display.
Details and selects different scan modes for image display.
Explains and activates the Picture-by-Picture display modes.
Details limitations for analog input signals in PBP mode and signal compatibility.
To Next Page
General
