Need help?Do you have a question about the TVLogic F-7HS and is the answer not in the manual?
Describes the control buttons and knob on the monitor's top panel.
Details the various input/output ports located on the sides and rear.
Visualizes the structure of the On-Screen Display (OSD) menu.
Explains how to navigate and interact with the OSD menu using controls.
Outlines the step-by-step process for operating the OSD menu.
Adjusts image parameters like brightness, contrast, sharpness, and color.
Configures color settings, including gamut, temperature, and individual color gains.
Manages display overlays like safety areas, center markers, and grids.
Controls display modes, aspect ratios, scan modes, and video signal properties.
Enables and configures waveform and vectorscope monitoring tools.
Manages audio output volume, channel selection, and level metering.
Configures system defaults, power saving, fan control, and version info.
Operates the OSD menu and input selection functions.
Controls menu navigation and accesses HOT KEY adjustments.
Allows quick access and assignment of various monitor functions.
Customizes the display's width and height aspect ratio.
Provides detailed analysis of video signal luminance and color components.
Magnifies specific areas of the image for closer inspection.
Facilitates conversion between HDMI and SDI signal formats.
Sets the monitor's maximum brightness levels for different environments.
Details the procedure for updating the monitor's internal software.
To Next Page
General
