Need help?Do you have a question about the TVLogic LVM-170A and is the answer not in the manual?
Essential safety guidelines for operating the monitor, including electrical safety, handling, and environmental considerations.
Overview of the monitor's primary functionalities, including signal compatibility, input support, and operational modes.
Detailed description of buttons, knobs, and indicators on the front panel of the LVM-170A model.
Explanation of input/output terminals and connectors located on the rear panel of the LVM-170A.
Detailed description of buttons, knobs, and indicators on the front panel of the LVM-171A model.
Explanation of input/output terminals and connectors located on the rear panel of the LVM-171A.
Guide to the on-screen display (OSD) menu layout and how to navigate through its sections.
Step-by-step procedure for adjusting settings using the monitor's control buttons and OSD.
Details on adjusting picture parameters like brightness, contrast, phase, and aperture for optimal image quality.
Instructions for configuring color temperature, RGB gain, and bias settings for accurate color reproduction.
Configuration of screen markers, safety areas, and aspect ratio indicators for framing.
Setup and configuration of GPI/UMD functions for remote control and tally information.
Using waveform and vectorscope tools for signal analysis and display calibration.
Configuration and operation of audio level meters and loudness monitoring functions.
Customizing display settings, OSD position, firmware version, and user configurations.
Step-by-step guide for updating the monitor's firmware using a USB memory stick.
How to select and switch between Analog and Digital (HDMI/DVI) input sources.
Procedure for selecting SDI inputs and general source input selection for different models.
Setting up and assigning functions to the programmable F1-F5 keys for quick access.
Selecting scan modes (1:1, Over Scan, Zero Scan) and customizing aspect ratios.
Utilizing advanced signal analysis tools like waveform, vectorscope, and line selection.
Using Luma Zone Check for exposure and Focus Assist for depth of field visualization.
Generating test patterns and viewing system status, including firmware and current settings.
Understanding and utilizing the loudness metering and logging functionalities.
List of supported resolutions and signal formats for DVI-Analog, DVI-Digital Graphic, and DVI-Digital Video modes.
Detailed technical specifications for the LVM-170A model, including display, input, output, and environmental data.
Detailed technical specifications for the LVM-171A model, including display, input, output, and environmental data.
Information on optional accessories that can enhance the functionality or usability of the monitor.
To Next Page
General
