Need help?Do you have a question about the TVLogic LVM-181S and is the answer not in the manual?
Supports various SDI, HDMI, and Analog signal formats for versatile connectivity.
Features Waveform, Vector Scope, Audio Meter, Knob Control, and Pattern Generator.
Includes Markers, Safety Areas, External Control, RS422/UMD, Power, and VESA Mount.
Diagram and labels for the LVM-181S front panel controls.
Diagram and labels for the LVM-181S rear panel connectors and ports.
In-depth explanation of individual front panel buttons and functions.
Detailed specifications of rear panel input/output connectors like BNC, HDMI, DVI, SDI.
Explains menu construction, control methods, and sequence for OSD navigation.
Lists parameters for PICTURE, VIDEO & DISPLAY, and COLOR sections of the menu tree.
Lists parameters for GPI, MARKER, and Function Key sections of the menu tree.
Lists parameters for WAVEFORM, AUDIO, and SYSTEM sections of the menu tree.
Details Brightness, Contrast, Chroma, Sharpness, and Aspect settings.
Explains 3G FORMAT, VIDEO RANGE, TIME CODE, BLUE ONLY, H/V DELAY, and FLIP settings.
Details Closed Caption related settings like CC INFO, DECODE CHANNEL, CAPTION SERVICE, TELETEXT PAGE.
Covers STANDARD, VIDEO RANGE, PEAK LUMINANCE, BLACK LEVEL, COLOR GAMUT, COLOR TEMP, EOTF settings.
Details EETF, HLG SG, SG, CAMERA LUT, CUSTOM 3D LUT settings.
Details COLOR COPY, COLOR SPACE, GAMMA, and BACK LIGHT settings.
Details GPI pin assignments and their functions for REMOTE control.
Explains UMD DISPLAY, background transparency, and font size settings.
Details UMD CHARACTER, COLOR, TALLY TYPE, and TALLY COLOR settings.
Details MARKER types, CENTER MARKER, SAFETY AREA, FIT MARKER, MAT, COLOR, THICKNESS.
Details USER MARKER H1/H2/V1/V2, SUB MARKER, SUB CENTER MARKER, SUB SAFETY AREA.
Details KEY LED and F1/F2/F3 KEY MAPPING functions.
Explains WAVEFORM DISPLAY, INTENSITY, TRANS., COLOR, LINE WAVEFORM, and SELECT LINE POSITION.
Details LUMA(Y') ZONE CHECK, ADJUST, FOCUS ASSIST, COLOR, LEVEL.
Details RANGE ERROR, Y MAX, Y MIN, C MAX, C MIN, Y/C PICTURE BLINK settings.
Details LEVEL METER SELECT, DISPLAY, REFERENCE, DECAY TIME, SIZE, POSITION.
Manages Key Lock, OSD display time, internal patterns, and firmware version.
Configures ECO modes, data save/load, defaults, and software upgrades.
Explains PBP/PIP mode selection and screen selection within PBP mode.
Allows adjustment of width/height display ratio via SCAN and PICTURE menu.
Displays Luma(Y') and Cb/Cr components, and Vector Scope for YUV and RGB signals.
Selects a specific horizontal line for Waveform and Vector Scope display.
Analyzes Luma(Y') levels, displays pixels in colors or zebra patterns for exposure analysis.
Assigns color to image boundaries to highlight in-focus areas, in color or mono.
Pixels exceeding Y'/C' levels blink, aiding in exposure adjustment.
Instructions for upgrading the monitor firmware using a USB thumb drive.
Lists supported resolutions and signal formats for SD, HD, and 3G SDI inputs.
Lists supported resolutions and signal formats for HDMI inputs.
Lists supported resolutions and frequencies for DVI-Analog, DVI-Digital Graphic, and DVI-Digital Video.
General| Screen Size | 18.5 inches |
|---|---|
| Resolution | 1920 x 1080 |
| Panel Type | IPS |
| Aspect Ratio | 16:9 |
| Brightness | 250 cd/m² |
| Contrast Ratio | 1000:1 |
| Viewing Angle | 178°/178° |
| Response Time | 5 ms |
| Color Gamut | 72% NTSC |
| Weight | 3.2 kg |
| Input Connectors | HDMI |
| Output Connectors | 3G-SDI |
| Dimensions (W x H x D) | 275 mm |
To Next Page
