3. Wipe off the oil from dipstick and insert to
the oil filling orifice. Now take out and check
for engine oil level. The level should be
between minimum and maximum level.
4. Repeat previous steps once again to
confirm oil level. Reassemble the dipstick
and tighten.
Engine oil replacement:
1. Warm up the engine for few minutes.
Repeat the first two steps of oil level check.
2. Remove the oil drain plug using a 17 mm
spanner. Carefully drain the oil into a
pan/tray. While removing drain plug filter
oil also comes out along with.
MAINTENANCE
Running engine with very low engine oil will
severly damge the engine components.
G
54
To Next Page
Loading...
