To Next PageTo Next PageWhy Twin-Star International 26EF023GRG Indoor Fireplace flame effect works but heater doesn't?
If your Twin-Star International Indoor Fireplace flame effect works but the heater doesn't, and the tray flashes when you press the heater button, the heater function might be disabled. To re-enable it, press and hold the POWER button for 10 seconds.
Why is Twin-Star International 26EF023GRG Indoor Fireplace heater not blowing warm air?
If your Twin-Star International Indoor Fireplace heater isn't blowing warm air, it might be because the room temperature is higher than the temperature you've set on the thermostat. Try adjusting the temperature settings so that the thermostat is set higher than the current room temperature.
What to do if Twin-Star International 26EF023GRG tray glows, but no flame effect?
If your Twin-Star International Indoor Fireplace tray glows but there is no flame effect, ensure that the flame button is in the “ON” position. Try pressing the flame button several times.
General| Brand | Twin-Star International |
|---|---|
| Model | 26EF023GRG |
| Category | Indoor Fireplace |
| Language | English |
Emphasizes reading the manual and warns of electric shock or fire risks if instructions are not followed.
Prohibits storing or using flammable vapors and liquids near the appliance.
Covers essential safety rules for operating electrical appliances, including handling, location, and maintenance.
Guidance on lifting and sliding the insert into the mantel opening and re-attaching mounting brackets.
Explanation of the POWER, FLAME, HEATER, and TIMER buttons on the control panel.
Critical warnings about electrical repairs, outlet wiring, water damage, and disconnecting power.
Guidance on resolving problems with the heater not producing warm air.
Troubleshooting steps for a disabled heater function or flashing tray light.
