Need help?Do you have a question about the Twinca e800 and is the answer not in the manual?
General| Category | Outdoor Cart |
|---|---|
| Power | Electric |
| Load Capacity | 800 kg |
| Motor Power | 2.2 kW |
| Battery Capacity | 120 Ah |
| Max Speed | 25 km/h |
| Weight | 350 kg |
| Tire Type | Pneumatic |
| Model | e800 |
Introduction to the machine, its function, and its suitability for various applications.
Guidelines for recycling machine components and information on noise levels.
Detailed technical data including dimensions, speeds, capacity, weight, and IP code.
Crucial safety guidelines for preventing accidents and ensuring safe operation.
Recommended PPE for operator safety, including eye, hand, hearing, and respiratory protection.
Information on the parking brake's automatic operation and engagement.
Correct positioning of safety fittings for operational and non-operational states.
Procedures for safe lifting and lashing the machine using designated points.
Rules for operating on slopes and safe downhill driving practices.
Comprehensive checklist for inspecting the machine's condition before operation.
How to connect and charge the machine's batteries daily.
Instructions for raising and lowering the dump bed using the control switch.
Explanation of the belly function and its effect on driving direction.
Reading the display and activating the machine with the ignition key.
Procedures for safely tipping and emptying the dump bed, including positional requirements.
Guide to identifying and resolving common problems like battery performance and dump bed movement.
Essential safety precautions before commencing any maintenance.
Schedule and guidance for hydraulic oil changes and leak management.
Recommended methods for cleaning the machine safely and effectively.
A schedule detailing periodic maintenance tasks for optimal performance.
Information on battery lifespan, replacement, and charging protocols.
Explanation of the data presented on the machine's identification plate.
Interpretation of safety symbols indicating potential hazards.
Clarification of signs that provide operational or feature information.
A visual representation of the hydraulic system and its main parts.
A diagram illustrating the electrical connections and current paths within the machine.
Details of what is covered by the warranty and specific exclusions.
Instructions and contact details for filing a warranty claim.
Official declaration confirming compliance with relevant European Union directives.
Identifies the manufacturer and the specific machine model, type, and manufacturing standards.
To Next Page