10
8 How to operate the machine
The machine is fully electrically powered. When you deactivate the rocker arm, the speed
of the machine is reduced to a full stop in the course of 3 seconds.
In order to advance, lift the rocker arm upwards (fig.1,pos 2)(forwards)
In order to reverse, press down the rocker arm d (fig.1,pos 2)(backwards).
NOTE! The parking brake is automatically released when the machine is operated.
Activation of the dump bed.
The switch (fig.1,pos 3) controls the hydraulic cylinder.
Press the upper part of the switch and the hydraulic cylinder raises.
Press the lower part of the switch and the hydraulic cylinder descends.
Belly function
When you activate the belly function (fig.1,pos 1) the driving of the machine is changed to
forward driving. Away from the driver and then it stops.
Display (fig.2,pos1)
Indication of operating hours and level of electricity of the batteries.
In case of an error on the machine, an alarm code is displayed.
Key. (fig.2,pos2)
When you turn the key, the controller of the machine is activated. Operating hours starts
counting.
To Next Page
Loading...